• 1
  • 2
  • 3
  • 4
  • 5
  • 6

Download category

Download

Download detail
Download >>  Isolation Transmitter >> 1-in-2-out two-wire input analog signal isolation transmitter

Product number:   JSD TA-1022 1-in-2-out two-wire input analog signal isolation transmitter
Title:    1-in-2-out two-wire input analog signal isolation transmitter
Category:    Isolation Transmitter
Add date:    8/10/2018
Clicks:    13
Download URL:     Download now
Description
      1-in-2-out two-wire input analog signal isolation transmitter
Features:    
Small size, low cost, international standards DIN35mm rail mounting
Three-port isolation (between input, output and power supply)
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
Full-scale range (<0.2% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (100PPM/)
Wide operation temperature (-45~+85)
High reliability (MTBF>50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC multiple choice)
For 220VAC power supply please choose JSD TA-1522 series
International standard signal input and output (0~5V/0~10V/1~5V/4 ~ 20mA/0~20mA, etc.)Application:
DC current/voltage signal isolation, conversion and amplification
industrial field signal isolation and long distance transmission without distortion
◆analog signal ground interference suppression and analog isolation,acquisition,conversion,and long-distance transmission
◆4~20mA/0~20mA/0~5V/0~10V sensor signal isolation, transformation and long-distance transmission
◆instrumentation and sensor signal transceiver
◆power isolation monitoring industrial field
◆power monitoring, medical equipment isolation barrier
◆supply power to two-wire instruments, meters, sensors, transmitters
◆overcome interference between instrumentation equipment
General Description:

Jie Shengda Technology JSD TA-1022 1-in-2-out two-wire analog signal isolation transmitter is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from meter and at the same time supply 24VDC power to two-wire instruments/meters/sensors/transmitters, and transmit a standard output signal or user-specified special signal to the control roomPLCPC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 2500VDC .It is widely used in the power isolation, monitoring and control of industrial site, analog signal isolation and acquisition etc. Adopting optocoupler isolation technology, compared with the electromagnetism isolation transmitter has a stronger anti-EMC electromagnetic interference ,it is available to keep high accuracy ,low temperature drift and good linearity, this isolation transmitter adopt international standard DIN35mm rail mounting, user-friendly installation, for conventional products please purchase JSD TA-1002 series, 220VAC power supply please purchase JSD TA-1522.

 
Shenzhen Jieshengda Technology Co,.Ltd. Copyright © isolation-transmitter.com All Right Reserved |  All products