• 1
  • 2
  • 3
  • 4
  • 5
  • 6

Product category


Product detail
 Isolation transmitter >> 1-in-1-out 4-20mA signals isolation transmitter
1-in-1-out 4-20mA signals isolation transmitter Product product_id  1-in-1-out 4-20mA signals isolation transmitter
Product name:
1-in-1-out 4-20mA signals isolation transmitter
Product notes:
1-in-1-out 4-20mA signals isolation transmitter
Product Category:
Isolation transmitter
   Product Description

1-input- 4-output active high accuracy isolation transmitter


Small size, low cost, international standards DIN35mm rail mounting

three-port isolation (input, output and power supply )

1-input-4-output ,isolated between channels

High accuracy (0.1% F.S, 0.2% F.S)

High linearity (0.1% F.S)

High isolation voltage (2500VDC/60S)

Low temperature drift (35PPM / ℃)

High reliability (MTBF>50 Wan hour)

Power supply (5VDC/12VDC/15VDC/24VDC single power supply options)

International standard signal input and output (0~2.5V/0~3.3V0~5V/1~5V/0~10V/0~±10V/4~20mA/

   0~± 20mA/0~20mA/0~10mA/0~1mA/0~100mV etc. optional)

Passed CE Certificate


◆ DC current/voltage signal isolation, conversion and amplification

◆ Analog signal ground interference suppression and analog isolation, acquisition

◆ 4~20mA/0~5V/1~5V/0~±10V/0~±20mA sensor signal isolation, transformation and signal
       distribution, conversion
      ◆ instrumentation and sensor signal transceiver

◆ power isolation monitoring industrial site

◆ Analog signal data isolation, acquisition, conversion, and long-distance transmission

◆ industrial field signal isolation and conversion, and long-distance transmission without distortion

◆ power monitoring, medical equipment isolation barrier

◆ overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field


General Description:

JieSheng Da Technology DIN35 1x4 MI active precision isolation transmitter is a Signal Conditioner with electrical insulation between input and output. It can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room、PLC、PC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 2500VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.  Suitable for using in vibration, damp industrial field, the standard DIN35mm rail mounting for easy user installation.



Hits:203  Add date:2/1/2015 【Print】 【Back
Shenzhen Jieshengda Technology Co,.Ltd. Copyright © isolation-transmitter.com All Right Reserved |  All products